The hydraulic powered pump is designed for use with T&L center pivots®. Comes with all controls needed to operate the pump with hydraulic oil.
Weight
75 lbs. simplex ,115 lbs. duplex
Benefits
- Built rugged for years of trouble free service
- High range of operating pressures (psi)
- Small in size
- Grease ports to extend life of pump
Features
- All wetted parts made of 316 Stainless Steel (Other materials available, please see the corrosive chemical section in the catalog for details)
- Gear reducer: heavy duty, double shafted (15:1 standard), call for other speeds
- O-rings: Viton®, EPR, Aegis, and Kalrez® for all of your chemical handling needs
- Vee-packing: N-buna, Viton®, Teflon® and special packing with a mixture of 2 styles
- Valves: 316 stainless steel (Kynar®, Polypropylene are available as well)
- Ball Checks: 316 stainless steel (Ceramic and Teflon® are available as well)
- Springs: 316 stainless steel (Hastelloy C available on certain models)
Outputs (gallons per hour) by Model
| Model | Min Output Simplex | Max Output Simplex | Min Output Duplex | Max Output Duplex |
|---|---|---|---|---|
| I-70 – .25 | .25 | 2.43 | .25 | 4.86 |
| I-70 – .375 | .55 | 4.47 | .55 | 10.94 |
| I-70 – .50 | .97 | 9.72 | .97 | 19.44 |
| I-70 – .675 | 1.52 | 15.2 | 1.52 | 30.40 |
| I-70 – .75 | 2.19 | 21.87 | 2.19 | 43.74 |
| HVI – 88 | 3.68 | 36.8 | 3.68 | 73.60 |
| HVI – 82 | 5.7 | 57 | 5.7 | 114 |
| IOM – 96 | 10 | 100 | 10 | 200 |
Please note: The outputs are based on flow control valve at no. 10 setting delivering 2 gph, hydraulic drive motor.