Acid Injection Pumps

All Inject-O-Meter corrosive chemical pumps can be powered by any of the drive options mentioned. These pumps are made from either polypropylene or Kynar®. Both are highly resistant to many chemicals; however, we suggest calling your chemical supplier on information regarding chemical compatibility with both of these polymers. These pumps are recommended for growers who need to inject acid as part of a prescribed maintenance program or to adjust the p.H. of the soil. The Kynar® pump is also excellent for injecting slurry materials. See below for other uses of Kynar®

Weight

75 lbs. simplex ,115 lbs. duplex

Benefits

• Built rugged for years of trouble free service
• High range of operating pressures (psi)
• Small in size
• Grease ports to extend life of pump

Features

• Gear reducer: heavy duty, double shafted (15:1 standard), call for other speeds
• O-rings: Viton®, EPR, Aegis, and Kalrez® for all of your chemical handling needs
• Valves: Kynar® or Polypropylene
• Ball Checks: Ceramic or Teflon®
• Springs: none or 316 stainless steel or (Hastelloy C available on certain models)

Other industrial uses for Kynar® injection pumps

• Pulp and Paper ………………..Bleaching operations
• Mining ……………………………… Abrasion and Chloride resistant
• Metal prep ……………………….High temperature and acid resistant
• Pharmaceutical ……………….USP Class VI, ozone sterilizable
• Petrochemical ………………… Alkylation units, Hydrocarbon mixtures
• Food and Beverage………… FDA, USDA, 3A listed
• Wastewater ……………………..Ultraviolet and fungus resistant
• Pesticides …………………………Halogen resistance and low permeation
• Institutional………………………. Low smoke and flame properties
• General Chemical ……………. Hot acids, halogens, alcohols, aromatics, oxidants, mild bases and aliphatics